Walter G. LEGGE Company, Inc.

ELIMSTAT ® SD

ELIMSTAT ® SD Static Dissipative Coating
ELIMSTAT ® SD is a water based static dissipative coating, manufactured with high quality acrylic latex. ELIMSTAT SD provides permanent static dissipation to a variety of surfaces and areas. The applications are limitless, but some include - floors, walls, ceilings, printed circuit boards, containers, plastic surfaces, etc. - anywhere static dissipation is desired. When used with LEGGE grounding devices, ELIMSTAT SD provides a static free work environment. The coating may be applied with roller, brush or sprayer. Surfaces should be clean and dry. Two coats minimum are required, 3-4 hours is the normal drying time between coats. Like all static dissipative surfaces ELIMSTAT SD must be tested regularly and maintained with proper maintenance products. Improper maintenance methods and products can block the conductivity and cause irregular readings. Concrete, tile and terrazzo floors with heavy dirt and grease build-up should be cleaned with TEXSPAR PLUS and STRIPPER #457. Floors must be rinsed and dried thoroughly before applying ELIMSTAT SD. ELIMSTAT SD is available in a variety of colors, including: BLUE-GREEN-GREY-BLACK-WHITE-YELLOW-RED. Floors must be tested after 24 hours to ensure that surface resistivity is between 10 7 and 10 9 ohms/square inch in compliance with ASTM D-257-80 test method. STAT-LES CLEANER: Floors coated with ELIMSTAT SD or STAT-LES may be maintained, as required, by damp mopping with a solution of STAT-LES CLEANER. Properly diluted (2-4 oz/gal) this method is very cost effective since it does not require rinsing and will not affect the conductivity of the floors.

ELIMSTAT ® SD SPECIFICATIONS
COATING TYPE: Water based acrylic static dissipative coating
COVERAGE: 300 - 450 square feet per gallon
CONDUCTIVITY: Static dissipative coating for the electronics industry requirements. Meets and exceeds MIL-B81705B for static decay.
COLORS: White, Grey, Green, Red, Blue, Tan, Black, Yellow
VEHICLE TYPE: Acrylic resin, waterborne
PIGMENT TYPE: Lead free, iron oxide, titanium dioxide and extenders
FLASH POINT: None DRY FILM THICKNESS: 1.5 mils per coat

VISCOSITY: 2700CPS AVERAGE DRYING TIME: @ 75 o F 50% R.H.: 1 hr to the touch first coat. re-coat after 3-4 hours.
SOLIDS: 40-60% by weight (varies by color) pH:8.3
WEIGHT: 10.5 - 12 LBS. per gallon (varies by color)

Options: