Walter G. LEGGE Company, Inc.

ELIMSTAT ® LX

ELIMSTAT LX Conductive Coating

ITEM #K4093 ELIMSTAT LX is a water based conductive coating, manufactured with high quality acrylic latex and waterborne Urethane. When applied to non-conductive surfaces, such as floors, bench tops, tote boxes, etc. ELIMSTAT LX provides conductivity to dissipate static charges. ELIMSTAT LX, along with appropriate LEGGE PERSONNEL BODY GROUNDING DEVICES, will provide a static free environment. ELIMSTAT LX is extremely cost effective. Cost per square foot is only a small fraction of the cost of conductive vinyl flooring and epoxy. ELIMSTAT LX is easy to apply, maintain and repair. Provides excellent wearability and detergent resistance. Like any conductive surface. ELIMSTAT LX must be tested regularly with a LEGGE LA-1 HC (hand crank) Conductivity tester (per NFPA CODE 99 and DOD specification 4145.26M) and maintained with proper LEGGE MAINTENANCE PRODUCTS. Improper maintenance methods and products can block the conductivity and cause irregular test readings.

ELIMSTAT LX SPECIFICATIONS:

Type................ Water based acrylic conductive coating

Viscosity ........... 800 to 1400 cps (depending on color) Brookfield #4 spindle @ 20 rpm

Coverage.. ....... 300-400 square feet per gallon

Conductivity ........Meets NFPA Code 99 and DOD 4145.26M specifications for Conductive flooring

Total Solids ................45 to 65% by weight (depending on color

Density .......................9 to 14 pounds per gallon (depending on color)

Vehicle type ...............Acrylic waterborne resin

Colors...........................Grey, Green, Maroon and Black

Flash point ................. None

Resistance ...................25,000 to 1 meg ohms (can be changed to customer specifications) or 10 5 ohms per square inch

Average Drying Time ..... @ 75 O F and 50% R.H. = 1 hour to the touch. Re-coat after 3 to 4 hours.

Shelf life ...................... 1 year (unopened)

Options: